DIY lock picks

What u'll need:

Metal coat hanger
Dremel or hand file
Wire cutters

Steps

1 - cut off about 10cm of coat hanger.
2 - strip the plastic of off the coat hanger.
3 - Use the Dremel or hand file to shape the tips of the coat hanger into the shapes of picks and tension wrenches u would like.
4 - Hand file the width of the picks so the fit into the lock

PICKING THE LOCK:
Now comes the trick part. When I made my first picks it took me about a week of randomly trying to pick the same lock. I eventually picked the lock by luck.but learnt a few trick along the way.
1 - the golden rule with picking locks is the amount of pressure uses by the tension wrench.
2 - the first time trying to pick a lock, use a rake pick and very the amount of pressure on the tension wrench every ten seconds.
3 - every ten seconds pull the pick and wench completely out of the pick to let the pins settle , then try again
4 - u will eventually get it, and when you do it will get easier and easier.

Peace

Never pick someone doses lock.
Stay out of trouble.
For information use only.

CRack & jaCk